CELLTRON™ Ultra

Ultra Hero2.psd

CELLTRON™ Ultra

The CELLTRON™ Ultra provides advanced battery testing capabilities for stationary batteries used in UPS systems, power utility, telecommunications industries and is ideal for use in data centers or other environments with high levels of electrical interference noise.

CRITICAL POWER CONFIDENCE

The CELLTRON™ Ultra combines advanced conductance technology, state-of-the-art portable electronics and convenient data management to facilitate fast, simple, safe and accurate battery management.

Ultra - User Interface - Wide.psd
KEY ADVANTAGES

Ultra - Icon - Software.psd

STRAIGHTFORWARD FUNCTIONALITY

Tests lead-acid batteries that are 2, 4, 6, 8, 10, 12, 14, and 16 Volt and can test batteries providing power to a load (in service) or not providing power (not in service).

Ultra - Icon - Hardware.psd

SOLID HARDWARE

Backlit graphical LCD, integrated infrared data transmitter, removable SD card, interchangeable probe and clamp testing interfaces, and a rechargeable on-board battery pack.

Ultra - Icon - Noise.psd

HIGH NOISE IMMUNITY

The enhanced conductance testing methodology enables accurate and repeatable testing in the presence of ultra-high electrical interference.

Ultra - Icon - Multimeter.psd

BUILT-IN MULTIMETER

The versatile multi-meter function allows for the measurement of AC & DC voltage and current. Scope mode displays AC ripple current and more.

Ultra - Front Display Menu - Wide.psd
STRAIGHTFORWARD FUNCTIONALITY

The CELLTRON™ Ultra software includes an icon-based menu and pre-loaded data on over 200 battery models to expedite testing and record-keeping. Over 250 pre-established reference/benchmark values are stored to assist in the development of battery pass/fail thresholds.

Ultra - LCD - Test.psd

TEST

Measures the status of a jar in voltages and conductance values. It displays conductance values in mhos.

Ultra - LCD - Battery Setup.psd

BATTERY SETUP

Configure testing information including site name, test jars only or jars & straps, battery voltage (2 Volt or 16 Volt).

Ultra - LCD - Battery Manager.psd

BATTERY MANAGER

Data on 12 battery manufacturers is pre-loaded to expedite testing and record-keeping process.

Ultra - LCD - Reports.psd

REPORTS

Print results, transfer to PC, add a Battery, test counter & version. 

Ultra - LCD - Utilities Setup.psd

UTILITIES SETUP

Update warning thresholds, temperature (C or F), mode-to change from automatic to manual test, or update to the latest firmware.

Ultra - LCD - Multimeter.psd

DIGITAL MULTIMETER

Measures AC & DC voltage, Current and Scope mode.

Ultra - Kit - Wide.psd
SOLID HARDWARE

The CELLTRON™ Ultra features a robust acid-resistant, ABS plastic with sure-grip overmolded enclosure that has been drop tested to 1 meter on 6 axis and includes all of the accessories to facilitate fast and safe battery testing.

Ultra - Probes.psd

DUAL CONTACT PROBES

4’ and 8’ long “Y” junction dual contact 6” probes with rotating heads and half inch tips for instant contact. Includes replaceable gold-plated over Duralloy® dual probe tips.

Ultra - Clamps.psd

DUAL CONTACT CLAMPS

4’ and 8’ long “Y” junction dual contact 5” clamps with 2” openings to attach to large battery terminals. Powder coated red / black with copper plated cold rolled steel teeth.

Ultra - Probe Extenders.psd

PROBE EXTENDERS

30’ lighted probe extenders with soft rubber handles allow user to access hard-to-reach areas such as UPS cabinets.

Ultra - Probe Optic Lamp Kit.psd

OPTIC LAMP KIT

Increase visibility in confined battery cabinets and racks and improves technician safety and test reliability while reducing risk of equipment damage.

Ultra - SD Memory Card.psd

SECURE DIGITAL CARD

Integrated 32-megabyte SD card stores data up to 500 locations or systems.

Ultra - Battery Pack.psd

RECHARGEABLE BATTERY

Includes two rechargeable battery packs-each providing power for more than 1,000 full test sequences, or more than 16 hours of test time.

Ultra - IR Printer.psd

IR THERMAL PRINTER

Print reporting data on the spot with the rechargeable, battery powered infrared thermal printer.

web_Celltron Advantage Backpack.psd

BACKPACK

 Ballistic nylon backpack with customized inserts fitted for the Celltron Ultra tester and accessories.

Ultra - Kit Contents - Wide.psd
COMPLETE KIT

The CELLTRON™ Ultra kit provides everything needed for performing battery maintenance, including test probes and extenders, test clamps, temperature sensor, PC software and portable printer.

INCLUDED IN THE KIT

  • CELLTRON™ Ultra battery tester
  • Test probes
  • Test clamps
  • 2 GB memory SD card
  • Charger with spare battery
  • Backpack
  • 32" lighted probe extenders
  • Belt loop
  • Infrared temperature sensor
  • Portable infrared printer
  • CELLTRAQ™ Express battery asset management software
Advantage - Celltraq - Wide.psd
BATTERY MANAGEMENT SOFTWARE

CELLTRAQ™ Enterprise (server-based) and CELLTRAQ™ Express (PC-based) interface via the CELLTRON™ Ultra's SD card for the storage, analysis, and reporting of battery testing data.

CONFIGURATION

Allows the configuration of test data reference values and threshold values to denote poor test results.

OUTPUT

Test results can be outputed in a PDF table and graph format for easy analysis.

CUSTOMIZE

Reports can be customized to include company logo and site information.


 

ONCE THE PRODUCT SHIPS, WE'RE JUST GETTING STARTED

 

The Franklin Electric Grid Solution Technical and Field Support Teams are here to assist with training, installation, and support. Our Field team will come to your site for training or installation supervision and our Support Center staff is available to assist with troubleshooting, warranty processing, and software installation support.

Applications

  • Tests individual lead acid cells or monoblocs (up to 16 Volts) in any common configuration, approximately 10-6000 Ah

 

Test Data Storage

  • 500 string locations of 480 test results per string stored internally

 

User Programmable Functions

  • Preset values for over 250 battery types
  • Low voltage alarm setting
  • Low conductance warning
  • Low conductance alarm
  • Test mode (pushbutton/auto start)

 

Calibration

  • Franklin Electric Grid Solutions will work with each customer to establish a regular calibration program if it is required by their quality or other management systems

Connectorized Test Cable Options

  • Dual contact clamps
  • Dual contact probes
  • Custom cables by quotation

 

Power Requirements

  • 9.6V, 1600mAH, NiMH
  • Internal swappable battery & charger

 

LCD - FSTN Display

  • 2.619 in x 1.309 in
  • 128 x 64 pixels
  • 40 degree viewing angle
  • Contrast ratio 8
  • Green LED backlight

 

Keypad

  • Stainless-steel dome
  • Polycarbonate overlay
  • 1,000,000 actuations

Data Transfer

  • Infra-red HP protocol
  • Infra-red
  • Half-duplex IRDA protocol
  • RS-232 printer
  • Secure digital card

 

Environmental Operating Range

  • 0 to +104°F (0 to +40°C)
  • 95% relative humidity
  • Non-condensing

 

Over Voltage Protection

  • Auto-reset disconnect
  • Reverse polarity protected

 

Housing Material

  • Acid-resistant ABS plastic
  • Santoprene™ overmold
Voltage Range 1.5 - 20.0 Volts DC
Conductance Range 100 - 19,990 Siemens
Accuracy + 2% across test range
Voltmeter Resolution 5mV
Storage Temperature -4 to 180°F (-20 to 82°C)
Analyzer Dimensions 11in x 4in x 3in
(279mm x 105mm x 80mm)
Analyzer Weight 2.6 lb (1 Kg)
Case Dimensions 19in x 15.5in x 7in
(485mm x 395mm x 180mm)
Shipping Weight 11 lb (5 Kg)

CELLTRON ULTRA BATTERY ANALYZER

Model Description
CTU-6000 KIT CELLTRON Ultra battery analyzer kit
CTU-6000 TESTER CELLTRON™ Ultra battery analyzer only

Included in the Kit

  • CELLTRON Ultra battery analyzer
  • Test probes
  • Probe extenders
  • Test clamps
  • Temperature sensor
  • Portable printer
  • Spare battery pack
  • Spare probe tips
  • CELLTRAQ Express battery asset management software

BATTERY ASSET MANAGEMENT SOFTWARE

CELLTRAQ™ Express

Model Description
CT-EXPRESS CELLTRAQ Express reporting software for for CELLTRON Advantage and CELLTRON Ultra.
  • Utilizes a CELLTRON™ Advantage .CSV file to create a pdf report and CELLTRON™ Ultra .CSV file
  • Allows the configuration of test data reference values and threshold values to denote poor test results
  • Outputs the test results in a table and graph format for easy analysis
  • Reports can be customized to include company logo and site information

ACCESSORIES & REPLACEMENT PARTS

DIGITAL AMP CLAMP/METER

Model Description
C040 Digital Amp Clamp/Meter
  • 40A DC/AC range
  • .90" (23mm) diameter jaw
  • One touch zero button
  • 400V DC/AC range
  • Requires 2 AA batteries
  • 600V overload protection for Ohm measurement
  • Weight: 1.5 lbs
  • Dimensions 10"L X 2"H X 4"W

DUAL CONTACT PROBES

Model Description
C093 4' dual contact probes
C025 8' dual contact probes
  • 4' cables have a "Y" junction spread of 24"
  • 8' cables have a "Y" junction spread of 48", for 6 and 12 Volt batteries only
  • 6" rotating heads and half inch tips for instant contact
  • Replaceable gold-plated over Duralloy® dual probe tips

DUAL CONTACT CLAMPS

Model Description
C092 4' dual contact clamps
C024 8' dual contact clamps, for 6 & 12 Volt batteries only
C062 4' dual contact industrial clamps with reinforced cables
  • "Y" junction spread of 48" (24" on industrial clamps)
  • 5" clamps with 2" openings to attach to large battery terminals
  • Powder coated red / black with copper plated cold rolled steel teeth

30” LIGHTED PROBE EXTENDERS

Model Description
C034 30” lighted probe extenders
C033 Replaceable optic lamp kit for probe extenders with adhesive tape
  • Soft rubber handles
  • Utilized in hard-to-reach areas such as UPS cabinets
  • Weight: 2 lbs

INFRARED LASER THERMOMETER

Model Description
C058 Infrared laser Ttermometer with Celsius / Farenheit mode settings
  • Requires 2 AAA batteries
  • Waterproof
  • Temperature Range: 32 °F to 932 °F (0 °C to 500 °C)
  • Weight: 1lb

RECHARGEABLE BATTERY PACK

Model Description
C090 NiMH rechargeable battery pack
  • 9.6V, 1800 mAh NiMH

BATTERY PACK CHARGER

Model Description
C091 NiMH battery charger
  • Input: 120 Volts AC, 60 Hz, 25 mA
  • Output: 12V, 100 mA

MEMORY CARD & READER

Model Description
C089 2GB SD memory card
C095 SD card reader
  • CELLTRON Ultra will not recognize an SDHC card

CUSTOM BACKPACK

Model Description
CA100 CELLTRON™ Branded Ballistic Nylon Backpack
  • Customized inserts fitted for the Celltron Advantage and Ultra handheld testers as well as accessories
  • Backpack only, tester and accessories sold separately

THERMAL IR / RS232 PRINTER

Model Description
CA087 Thermal IR / RS232 printer for use with CELLTRON™ Advantage
  • Power adapter and 4 NMH rechargable AA batteries included
  • Weight: 1 lb
  • Dimensions: 2.25"H X 75"L X 3.25"W

PRINTER POWER ADAPTER / CHARGER

Model Description
A090 Power adapter / charger for CA087 thermal IR / RS232 printer

THERMAL PRINTER PAPER

Model Description
A095 6 pack thermal printer paper rolls

REPLACEMENT PROBE TIPS

Model Description
C069 Replacement probe tips (4 probe tips, 2 probe caps)
C031 Replacement probe waffle tips (4 probe tips)
  • Replaceable gold-plated over Duralloy® dual probe tips